Microphone Windscreens, Mic-Muff's, Microphone Accessories

An American Manufacturing Company Since 1976

Manufactured And Distributed By The Olsen Audio Group, Inc.

Adapters

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

We DO NOT use Asian made foam that contains Formaldehyde and other dangerous chemicals.

  • CM-58 Hot Shoe to Microphone Adapter

    Standard Photo Hot Shoe to 5/8″-27 Microphone Adapter.
    Bottom also has a Female 1/4″-20.

  • PPA-01 / PPA-02 / PPA-03 Extension Pole Adapters

    The PPA-01, PPA-02 and PPA-03 extension pole adapters
    are designed to give both Audio and Photo/Video professionals
    a new cost effective way to extend the height of an antenna,
    camera or microphone. The PPA Series from WindTech®
    is designed to fit most painters extension poles
    (and some broom handles) available at most local hardware
    and home improvement stores such as Home Depot or Lowe’s.

    Tested models include; Wooster Sherlock Pole, Mr. Longarm,
    Linzer Pro Everlock, Unger Pro Line, Lowe’s Quickie Pro Pole
    and the Home Depot 5′ Extension Pole.
    * Please test the adapter before purchasing an
    extension pole as thread will vary in size.

    PPA-01: Acme 3/4″-5 Female to 5/8″-27 Male Microphone Thread
    PPA-02: Acme 3/4″-5 Female to 3/8″-16 or 1/4″-20 Male Adapters
    PPA-03: Acme 3/4″-5 Female to 1/4″-20 Male Ball Socket Adapter

  • “M” Series Adapters M-1

    5/8″-27 Female to 3/8″-16 Male
    Microphone Stand Thread Adapter

  • CM-80

    Standard Photo  Hot Shoe / Cold Shoe
    to 1/4″-20 Adapter.
    Attaches to a video or still camera
    accessory shoe.  Allows the mounting
    of a LCD monitor, audio recorder
    or other equipment to the camera.
    Includes two large locking nuts.
    Made of high quality aluminum
    in a natural finish.
    Made In America!

  • CM-90

    Sony type Inverted Hot Shoe / Cold Shoe Adapter.
    Converts any 1/4″-20 female
     thread to a
    standard 5/8”-27 male Microphone thread.
    The CM-90 allows the
     user to mount a
    microphone to any camera with a 1/4”-20
    female accessory
     or tripod mount.
    Includes two large knurled locking nuts.
    Made In America!

  • M-2 / M-2B

    5/8″-27 Female Thread
    Standard Microphone Stand Top Nut
    Available in Chrome (M-2) or Black (M-2B)

  • CM-57f

    5/8″-27 Male Microphone Thread
    to Photo Standard Hot Shoe / Cold Shoe Mount.
    3/8″-16 Internal Female Thread
    .
    [AKA AT8469]

  • CM-01

    5/8″-27 Female to
    1/4″-20 Male
    Fully Adjustable Ball Socket

  • M-3

    5/8″-27 Male to
    3/8″-16 Female
    Thread Adapter

  • M-19

    Adapts any standard microphone stand to photo
    standard thread. 5/8″-27 Female to 1/4″-20 Male.
    Hard Anodized Aluminum, Black.

  • M-18 Male Thread Converter

    The M-18 allows the attachment of microphones
    and other audio equipment to photo standard
    female threads. 1/4″-20 Male to 3/8″-16 Male.

  • M-14

    Microphone / Photo / Video 3/8″ Lock Nut
    Large 25mm Diameter Locking Nut

    Euro Standard 3/8″-16 Female Thread

  • M-15

    Microphone Stand Top Mounting Adapter
    Standard 5/8″-27 Female Brass Microphone Stand Insert
    Overall Height: 1.480″ (38mm)
    Overall Diameter: 0.86″ (22mm)
    Top Section
    Top Stud Height: 0.652″ (21mm)
    Top Stud Width: 0.55″ (14mm)
    Top Stud Depth: 0.24″ (6mm)
    Hole Diameter: 0.24″ (6mm)

  • MA-658

    Multiple Microphone Holder / Press Bar
    Use For Press Conferences or as Stereo Bar
    Holds Up To 7 Microphones with center mount
    5/8″-27 Female to Six 5/8″-27 Male

  • QC-2B

    5/8″-27 Female to 5/8″-27 Male
    Microphone Stand Quick Disconnect
    – Black –

  • MA-458

    Press Conference Bar or Multi Microphone or Accessory Adapter
    Clamps to most microphone stands from .85″ (21mm) to 1.18″ (30mm)
    Adapts to Four 5/8″-27 Male thread with locking nuts

  • BHC-20

    Mini Ball Head with “C” Clamp.
    Uses BH-1 Mini Ball Head. “C” type Clamp
    opens to 1-1/4″.
     Rubber edge protector
    to help prevent scratching.
    Clamps to flat or curved surface.

  • M-17 GoPro Camera Tripod Adapter

    The M-17 allows you to attach a GoPro HERO (3+, 3, 2, 1) Housing
    or Skeleton Frame to any standard tripod or other 1/4″-20 Male thread.
    The M-17 can also be used with WindTech® PPA-02 Pole Adapter as well.

  • M-11

    RCA Microphone Thread Adapter
    Female 5/8″-27 to Male 1/2″ Pipe Thread Adapter
    Made of Type 414 Stainless Steel in a natural finish.

  • M-4

    5/8″-27 Female Thread
    Large Locking Mic Stand Nut

    – Chrome –

  • BHC-10

    Mini Ball Head with Spring Clamp.
    Uses BH-1 Mini Ball Head.
    Spring Clamp opens to 1-1/4″.

    Rubber edge protector to
    help prevent scratching.

  • M-5

    5/8″-27 Female Thread
    Large Locking Mic Stand Nut
    – Black –

  • QC-2

    5/8″-27 Female to 5/8″-27 Male
    Microphone Stand Quick Disconnect
    – Chrome –

  • BH-1

    Mini Ball Head. Ball socket rotates
    360 degrees. 
    Locks in any position.
    Standard Photo Male 1/4″-20 top thread.

    Bottom has 3/8″-16 Female and includes
    a 1/4″-20 Female TA-1 thread adapter.
    Mounts to both 1/4″-20 and 3/8″16 threads.

  • M-7

    Threaded adapter for lighting stands or camera
    tripods to convert from a male 1/4”-20 to standard
    microphone thread. 1/4”-20 female to 5/8”-27 male.

  • MA-01

    5/8″-27 Female to
    5/8″-27Male Thread
    Fully Adjustable Locking Ball Socket

  • TA-2

    1/4″-20 Male to 3/8″-16 Male Thread Adapter.
    Converts a Male 1/4″-20 Stud to 3/8″-16
    3 Per Package.

  • M-13

    Photo / Video / Tripod 1/4″ Lock Nut
    Large 25mm Diameter Locking Nut

    Photo Standard 1/4″-20 Female Thread

  • M-20

    Adapts any standard microphone stand from
    5/8″-27 Female to Euro standard 3/8″-16 Male.
    Hard Anodized Aluminum, Black.

  • TA-1

    3/8″-16 Female to 1/4″-20 Female Thread Adapter.
    Converts a Female 3/8″-16 thread to 1/4″-20
    3 Per Package.

  • M-16

    5/8″-27 Male to 3/8″-16 Female
    Microphone Thread Adapter

  • M-10

    Female 3/8″-16 to Female 1/4″-20
    Thread Adapter
    .  Made of Type 303
    Stainless Steel in a natural finish.

  • M-21

    Stud adapter for the MPC-10 Multi Position Clamp
    5/8″-27 Male Thread to 3/8″ Male Stud
    1.5″ Total Length, .75″ Stud Length

  • M-9

    Female 1/4″-20 to Male 3/8″-16
    Thread Adapter
    .  Made of Type 303
    Stainless Steel in a natural finish.

  • CM-38

    Standard Photo Hot Shoe / Cold Shoe to 3/8″-16 Adapter.
    Includes two knurled locking nuts.

  • GR-2 Mic-Grip Microphone / Boom Pole Handle

    GR-2 Mic-Grip
    • 5 Inch Long Soft Foam Ergonomic Handle / Grip
    • Light Weight (0.1 Ounce) Aluminum Core
    • Thread Adapters Are Included
    • Includes Female 3/8″-16 or Female 1/4″-20
    • Features Male 5/8″-27 or Male 3/8″-16

  • MA-358

    Triple Microphone Adapter
    3 Microphone Press Bar, Adjustable Angle

    5/8″-27 Female to Three 5/8″-27 Male

  • CM-14

    Standard Photo Hot Shoe / Cold Shoe  to 1/4″-20 Adapter.
    Includes two knurled locking nuts.

  • M-8

    Female 3/8″-16 to Male 1/4″-20
    Thread Adapter. Made of Type 303
    Stainless Steel in a natural finish.

  • FS-1

    Standard Photo Flash Hot Shoe Stand.
    Includes Female 1/4″-20 thread insert.

  • M-12

    Microphone stand 5/8“-27 female to male 1/4”-20 thread.

  • GR-1 Cam-Grip DSLR, GoPro, Video Camera Handle

    GR-1 Cam-Grip DSLR, GoPro, Video Camera Handle

    GR-1 Cam-Grip™

    • 5 Inch Long Soft Foam Ergonomic Handles / Grips
    • Light Weight (0.1 Ounce) Aluminum Core
    • Thread Adapters Are Included
    • Includes Female 3/8″-16 and a Female 1/4″-20 Adapter
    • Cam-Grip Features Male 5/8″-27 and a Male 1/4″-20 Adapter
* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WINDSCREEN COLORS

Grey-01, Off-White-02, Yellow-03, Red-04, Royal Blue-05, Purple-06, Tangerine-07, Orange-08, Brown-09, Pink-10, Green-11, Black-12, Light Grey-13, Navy Blue-14, Mauve-15, French Blue-16, Apricot-17, Sea Green-18, Tan-19, Neon Pink-20, Neon Yellow-21, Neon Green-22.

TIE-DYE 300 SERIES ONLY

Discontinued
Tie-Dye Blue-23, Tie-Dye Green-24, Tie-Dye Red-25.

MODEL NUMBERS

The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

MODEL NUMBERS

The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WINDSCREEN COLORS

Grey-01, Off-White-02, Yellow-03, Red-04, Royal Blue-05, Purple-06, Tangerine-07, Orange-08, Brown-09, Pink-10, Green-11, Black-12, Light Grey-13, Navy Blue-14, Mauve-15, French Blue-16, Apricot-17, Sea Green-18, Tan-19, Neon Pink-20, Neon Yellow-21, Neon Green-22.

TIE-DYE 300 SERIES ONLY

Discontinued
Tie-Dye Blue-23, Tie-Dye Green-24, Tie-Dye Red-25.

MODEL NUMBERS

The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

NEED EVEN MORE WIND PROTECTION?

BG-1 Windscreen with a Mic-Muff MM-101 Fur Windshield shown. Mic-Muff Faux Fur Windshields are available for all WindTech® Shotgun and Big Gun Windscreen Models.
* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.

WindTech SonicFoam is in compliance with California Proposition 65,
Department of Toxic Substances Control (DTSC) Toxics in Packaging Laws
and the EU European Commission RoHS Directive 2011/65/EU.
As well as SVHC, REACH and all amendments and GS Mark,
ZLS Standard Document ZEK 01 for Poly Aromatic Hydrocarbons.
 
WindTech SonicFoam DOES NOT contain Formaldehyde, Phthalates, DEHP,
DBP, BPA, Lead, Mercury, Hexavalent Chromium, Cadmium,
TDCPP, Tris Phosphate or Animal Derived ingredients.
 
WindTech SonicFoam is Polyurethane Foam, CAS # 9009-54-5 and is Made in America.

WINDSCREEN COLORS

Grey-01, Off-White-02, Yellow-03, Red-04, Royal Blue-05, Purple-06, Tangerine-07, Orange-08, Brown-09, Pink-10, Green-11, Black-12, Light Grey-13, Navy Blue-14, Mauve-15, French Blue-16, Apricot-17, Sea Green-18, Tan-19, Neon Pink-20, Neon Yellow-21, Neon Green-22.

MODEL NUMBERS

The model number is derived from a combination of the Series number and the Color number. For example, a black 300 Series would be a 312, a red 1100 Series would be an 1104.

* NOTE FOR ALL MODELS: The recommendations given are estimates based on the manufacturers published specifications. This list is intended as a guide only. The user should try the windscreen for proper fit and use. Shape, size and color may vary slightly from different production lots.